Leader-mw | Introduction to Broadband Couplers |
•Rf high pass filter allow you to use a common distributor system for all mobile communication applications in the broad frequency range.
•Apply to TD-SCDMA/ WCDMA/ EVDO/ GSM/ DCS/ CDMA/ WLAN/ CMMB/ colony communication system
Typical cases: Metro system, government office buildings, gyms and stations and Information distribution system.
•In the circuit and high frequency electronic system has better frequency selective filtering effect, high pass filter can suppress useless out of band signals and noise.In the aviation, aerospace, radar, communication, electronic countermeasure, radio and television and various applications in electronic test equipment
•Meet various demands of network systems with the Ultra-wideband design.
•Rf high pass filter Suitable for the coverage e indoor system of cellular mobile communication
•A high-pass filter, also known as a low-cut-off filter or a low-resistance filter, allows frequencies higher than a certain frequency to pass through while greatly attenuating lower frequencies.It removes unnecessary low frequency components from the signal or it removes low frequency interference
Leader-mw | Specification |
Frequency Range | 1.3-15GHz |
Insertion Loss | ≤2.0dB |
VSWR | ≤1.8:1 |
Rejection | ≥40dB@Dc-1000Mhz |
Power Handing | 1W |
Port Connectors | SMA-Female |
Surface Finish | Black |
Configuration | As Below (tolerance±0.5mm) |
colour | black |
Remarks:
Power rating is for load vswr better than 1.20:1
Leader-mw | Environmental Specifications |
Operational Temperature | -30ºC~+60ºC |
Storage Temperature | -50ºC~+85ºC |
Vibration | 25gRMS (15 degrees 2KHz) endurance, 1 hour per axis |
Humidity | 100% RH at 35ºc, 95%RH at 40ºc |
Shock | 20G for 11msec half sine wave,3 axis both directions |
Leader-mw | Mechanical Specifications |
Housing | Aluminum |
Connector | ternary alloy three-partalloy |
Female Contact: | gold plated beryllium bronze |
Rohs | compliant |
Weight | 0.15kg |
Outline Drawing:
All Dimensions in mm
Outline Tolerances ± 0.5(0.02)
Mounting Holes Tolerances ±0.2(0.008)
All Connectors: SMA-Female