Leader-mw | Introduction to 2 Way power divider |
2 Way SMA Female Power Dividers
This is a power splitter that is often used in mobile communications. The same signal band can be divided into two, the same output. Standard "" external thread + hole", "internal thread + needle" SMA link head, RF range is 400-3000MHZ. Low insertion loss, small size Suitable for power distribution requirements of any mobile communication equipment, wireless communication equipment.
Leader-mw | specification |
No. | Parameter | Minimum | Typical | Maximum | Units |
1 | Frequency range |
0.4 |
- |
3 |
GHz |
2 | Insertion Loss |
- |
- |
0.5 |
dB |
3 | Phase Balance: |
- |
±3 |
dB |
|
4 | Amplitude Balance |
- |
±0.3 |
dB |
|
5 | VSWR |
- |
1.35(Input) |
- |
|
6 | Isolation |
20 |
dB |
||
7 | Operating Temperature Range |
-30 |
- |
+60 |
˚C |
8 | Impedance |
- |
50 |
- |
Ω |
9 | Connecter |
SMA-F |
|||
10 | Preferred finish |
SLIVER |
Remarks:
1、Not Include Theoretical loss 3 db 2.Power rating is for load vswr better than 1.20:1
Leader-mw | Environmental Specifications |
Operational Temperature | -30ºC~+60ºC |
Storage Temperature | -50ºC~+85ºC |
Vibration | 25gRMS (15 degrees 2KHz) endurance, 1 hour per axis |
Humidity | 100% RH at 35ºc, 95%RH at 40ºc |
Shock | 20G for 11msec half sine wave,3 axis both directions |
Leader-mw | Mechanical Specifications |
Housing | Aluminum |
Connector | ternary alloy three-partalloy |
Female Contact: | gold plated beryllium bronze |
Rohs | compliant |
Weight | 0.15kg |
Outline Drawing:
All Dimensions in mm
Outline Tolerances ± 0.5(0.02)
Mounting Holes Tolerances ±0.2(0.008)
All Connectors: SMA-Female
Leader-mw | Test Data |