Leader-mw | Introduction to High Gain Horn Antenna |
Horn antenna is the most widely used type of microwave antenna, which is a circular or rectangular section with the gradual opening of the waveguide terminal.Its radiation field is determined by the size of horn mouth and propagation type.Among them, the effect of horn wall on radiation can be calculated by using the principle of geometrical diffraction.If the length of the horn remains constant, the phase difference between the size of the mouth and the second power will increase with the increase of the horn Angle, but the gain will not change with the size of the mouth.If you need to expand the frequency band of the speaker, you need to reduce the reflection of the neck and mouth surface of the speaker;The reflection will decrease with the increase of the surface size.Horn antenna structure is relatively simple, the direction diagram is also relatively simple and easy to control, generally as a medium directional antenna.Parabolic reflector horn antennas with wide frequency band, low sidelobe and high efficiency are often used in microwave relay communication
Leader-mw | Specification |
ANT0825 0.85GHz~6GHz
Frequency Range: | 0.85GHz~6GHz |
Gain, Typ: | ≥7-16dBi |
Polarization: | Vertical polarization |
3dB Beamwidth, E-Plane, Min (Deg.): | E_3dB:≥40 |
3dB Beamwidth, H-Plane, Min (Deg.): | H_3dB:≥40 |
VSWR: | ≤ 2.0: 1 |
Impedance: | 50 OHMS |
Port Connectors: | SMA-50K |
Operating Temperature Range: | -40˚C-- +85 ˚C |
weight | 3kg |
Surface Color: | Green |
Outline: | 377×297×234mm |
Remarks:
Power rating is for load vswr better than 1.20:1
Leader-mw | Environmental Specifications |
Operational Temperature | -30ºC~+60ºC |
Storage Temperature | -50ºC~+85ºC |
Vibration | 25gRMS (15 degrees 2KHz) endurance, 1 hour per axis |
Humidity | 100% RH at 35ºc, 95%RH at 40ºc |
Shock | 20G for 11msec half sine wave,3 axis both directions |
Leader-mw | Mechanical Specifications |
Housing | Aluminum |
Connector | ternary alloy three-partalloy |
Female Contact: | gold plated beryllium bronze |
Rohs | compliant |
Weight | 3kg |
Outline Drawing:
All Dimensions in mm
Outline Tolerances ± 0.5(0.02)
Mounting Holes Tolerances ±0.2(0.008)
All Connectors: SMA-Female
Leader-mw | Test Data |