Leader-mw | Introduction to LGL-28.9/29.5-2.92 K Band Coaxial Isolator |
The LGL-28.9/29.5-2.92 K Band Coaxial Isolator, sourced from leader-mw and equipped with a 2.92 mm connector, is meticulously engineered to cater to the sophisticated demands of microwave communication systems operating within the K band frequency spectrum (28.9-29.5 GHz). This high-performance isolator plays a pivotal role in ensuring unidirectional signal transmission while effectively mitigating signal reflections and unwanted interference, thereby preserving signal integrity and enhancing system efficiency.
With an insertion loss of merely 0.3 dB, it guarantees minimal power attenuation, maintaining the strength of the transmitted signal. Its remarkable isolation performance, exceeding 20 dB, ensures that any reflected signals are significantly suppressed, preventing them from compromising the operation of sensitive receiver components or causing system instability. The LGL-28.9/29.5-2.92 K Band Coaxial Isolator boasts a VSWR (Voltage Standing Wave Ratio) of less than 1.3, indicative of its excellent impedance matching capabilities, which further contribute to optimal power transfer and reduced losses.
Leader-mw | Specification |
No. | Parameter | +25°C | -30~+70°C | Units |
1 | Frequency range |
28.9-29.5 |
GHz |
|
2 | Insertion Loss |
≤0.4 |
≤0.6 |
dB |
3 | Isolation |
≥20 |
≥18 |
dB |
4 | VSWR |
≤1.2 |
≤1.25 |
dB |
5 | Impedance |
50 |
Ω |
|
6 | Forward Power | 5W/cw 1W/RV | ||
7 | Operating Temperature Range | -30~+70℃ | ||
8 | Connecter | 2.92-F | ||
9 | Direction | 1→2→ clockwise |
Remarks:
Power rating is for load vswr better than 1.20:1
Leader-mw | Environmental Specifications |
Operational Temperature | -30ºC~+70ºC |
Storage Temperature | -50ºC~+85ºC |
Vibration | 25gRMS (15 degrees 2KHz) endurance, 1 hour per axis |
Humidity | 100% RH at 35ºc, 95%RH at 40ºc |
Shock | 20G for 11msec half sine wave,3 axis both directions |
Leader-mw | Mechanical Specifications |
Housing | 45 Steel or easily cut iron alloy |
Connector | Stainless steel |
Female Contact: | copper |
Rohs | compliant |
Weight | 0.10kg |
Outline Drawing:
All Dimensions in mm
Outline Tolerances ± 0.5(0.02)
Mounting Holes Tolerances ±0.2(0.008)
All Connectors:2.92-F
Leader-mw | Test Data |