Products
LHS102-18M18M-XM Microwave Test Cable Assembly
| Leader-mw | Introduction to Microwave Test Cable Assembly |
Chengdu leader microwave Tech.,(leader-mw)The transmission rate of the RF microwave test cable assembly can vary depending on the specific cable and the frequency range in which it is designed to work. However, the 82 dB/100 ft transfer rate is a common specification for many RF microwave test cable assemblies in the 1 to 18 GHz frequency range. This transmission rate refers to the amount of signal attenuation that occurs along a 100-foot cable. A lower value indicates less signal loss and higher signal integrity.
LEADER-MW specializes in the production of microwave test cable assembly, LHS102-18M18M-XM 67GHz test cable assembly RF range DC~ 67000MHz, can be used for wireless communication, etc.
| Leader-mw | specification |
| Frequency Range: | DC~ 67000MHz |
| Impedance: . | 50 OHMS |
| Time delay:（nS/m） | 4.06 |
| VSWR: | ≤1.4 : 1 |
| Dielectric voltage:（V，DC） | 350 |
| shielding efficiency (dB) | ≥90 |
| Port Connectors: | 1.8MM-male |
| transmission rate (%) | 82 |
| Temperature phase stability (PPM) | ≤550 |
| Flexural phase stability (°) | ≤3 |
| Flexural amplitude stability (dB) | ≤0.1 |
Outline Drawing:
All Dimensions in mm
Outline Tolerances ± 0.5(0.02)
Mounting Holes Tolerances ±0.2(0.008)
All Connectors: 1.8-M
| Leader-mw | Mechanical and environmental performance |
| Cable outer diameter (mm): | 2.2 |
| Minimum bending radius (mm) | 22 |
| Operating temperature (℃) | -50~+165 |
| Leader-mw | Attenuation(dB) |
| LHS102-18M18M-0.5M | 4 |
| LHS102-18M18M-1M | 7 |
| LHS102-18M18M-1.5M | 9.9 |
| LHS102-18M18M-2M | 12.9 |
| LHS102-18M18M-3M | 18.8 |
| LHS101-1M1M-5M | 30.7 |
| Leader-mw | Delivery |
| Leader-mw | Application |
