-
LPD-DC/40-4S DC-40Ghz 4-Way Resistance Power Divider Combiner
Frequency:DC-40Ghz
Type:LPD-DC/40-4S
Insertion Loss:14.8 dB(DC-26.5GHz) ≤16.8 dB(26.5-40GHz)
Amplitude Balance:±1dB
VSWR: ≤1.8 : 1 (DC-26.5GHz) ≤2.0 : 1 (DC-40GHz)
Power:1W
Connecter:2.92-F
-
DC-50Ghz 2 way Resistance Power Divider
Frequency:DC-50Ghz
Type:LPD-DC/50-2S
Insertion Loss:2.5dB
Amplitude Balance:±0.6dB
Phase Balance: ±6
VSWR: 1.65
Power:1W
Connecter:2.4-F
-
2 way Power Divider-Full range of products
2-way power dividers at all frequencies Features： Miniaturization,Compact structure ,High qualitySmall size,High isolation,Low insertion loss,Excellent VSWRMultli-band Frequency CoverageN,SMA,DIN,2.92 ConnectorsCustom Designs Available Low cost Design,Design to costpngAppearance color variable,3 years warranty
-
2way 2.92mm Resistive Power Divider
2way 2.92mm resistive power divider,LEADER microwave carries a wide selection of power dividers and splitters to fit your needs,these components are essential in many systems,allowing the combination of muliple signals or splitting of a single signal into mutiple signals with equal magnitude and phase.
-
4-Way SMA-Female Power Dividers
4-Way SMA-Female Power Dividers LPD-2/8-4SPower Divider Specifications ， This is a good performance for L-band 1 minute 4-way wilkinson wideband splitter with isolation greater than 20dB and insertion loss less than 6.2dB VSWR less than 1.2! Sma famale connector with frequency bandwidth,…
4 Way Power Splitter
For testing in rf and microwave power dividers is used as power distribution circuit, widely used in the field of mobile communication and satellite radar, electronic countermeasures, test and measurement, and other areas of the uwb, we have a strong research and development production capacity, production power dividers with good frequency characteristic, stable performance, high precision, big power, high reliability, simple installation process and so on
4 Way Power Divider Combiner Splitter
4 way Power Divider Combiner Splitter The technical specifications of the power splitter include frequency range, withstand power, distribution loss from main path to branch, insertion loss between input and output, isolation between branch ports, voltage standing wave ratio of each port, etc….
6 Way Power Divider Combiner Splitter
The six-way power splitter divides the power into six equal outputs. It is designed with high-quality electronic components. The RF range is 500-3000mhz. It has frequency bandwidth, high isolation, low insertion loss, small in-band ripple and stable performance. Advantage： 1： using SMA, N type…
6 way Power Divider
Features: Miniaturization,Compact structure ,High quality Small size,High isolation,Low insertion loss,Excellent VSWR Multli-band Frequency Coverage N,SMA,DIN,2.92 Connectors Custom Designs Available Low cost Design,Design to cost Appearance color variable,3 years warranty
6 Way Power Splitter
For over 15 years, Leader microwave expertise in power dividers and combiners have proudly supplied government, military, defense and commercial contractors as well as education and research institutions with trusted and reliable products. Our power dividers and combiners are assembled and tested with the highest craftsmanship and standards. We pride ourselves in offering top-quality product at reasonable prices, outstanding customer service, prompt response on quote inquiries, keeping products fully-stocked and ready for delivery, and fast turnaround time.
DC-4G 100W N And DIN Type Attenuator
Type:LSJ-DC/4-100W-N-X
Frequency:DC-4G
Impedance (Nominal): 50Ω
Power :100w@25℃
The Attenuation Value:20dB,30dB,40dB,50dB,60dB
VSWR:1.25
Temperature Range：-55℃~ 125℃
Connecter type:N-F /N-M
F-F Connecter 75 Ohm Filter
Type:LBF-488/548-1F
requency Range 488-548MHz
Insertion Loss ≤1.0dB
Ripple in band ≤0.6dB
VSWR ≤1.3:1
Rejection lower ≥30dB@Dc-474MHz Rejection Upper ≥30dB@564-800MHzPort
Connectors F-Female(75ohms)
