Leader-mw | Introduction to 3-6Ghz Drop in isolator |
Leader micrwave Tech., drop in isolators are designed to effectively isolate different components or systems within a larger network. This plays a vital role in preventing interference, increasing efficiency, and improving overall performance. With our isolators, you can be confident of getting the best results in your application.
One of the main features of our isolators is their versatility. They can be seamlessly integrated into a variety of devices, making them suitable for a wide range of industries. Whether it's telecommunications, aerospace, medical equipment or any other field that requires reliable isolation, our products deliver consistent, high-quality performance.
Leader-mw |
What is drop in isolator |
RF drop in isolator
What is drop in isolator?
1.Drop-in Isolator is used in the design of RF modules using micro-strip technology where in both the input and output ports are matched on the micro-strip PCB
2.it is a two port device made of magnets and ferrite material used to protect rf components or equipment connected at one port from the reflection of the other port
Leader-mw | Specification |
LGL-3/6-IN-60W -NJ
Frequency (MHz) | 3000-6000 | ||
Temperature Range | 25℃ | 0-60℃ | |
Insertion loss (db) | 0.5 | 0.8 | |
VSWR (max) | 1.3 | 1.4 | |
Isolation (db) (min) | ≥18 | ≥16 | |
Impedancec | 50Ω | ||
Forward Power(W) | 60w(cw) | ||
Reverse Power(W) | 60w(rv) | ||
Connector Type | Drop In |
Remarks:
Power rating is for load vswr better than 1.20:1
Leader-mw | Environmental Specifications |
Operational Temperature | -30ºC~+60ºC |
Storage Temperature | -50ºC~+85ºC |
Vibration | 25gRMS (15 degrees 2KHz) endurance, 1 hour per axis |
Humidity | 100% RH at 35ºc, 95%RH at 40ºc |
Shock | 20G for 11msec half sine wave,3 axis both directions |
Leader-mw | Mechanical Specifications |
Housing | 45 Steel or easily cut iron alloy |
Connector | Strip line |
Female Contact: | copper |
Rohs | compliant |
Weight | 0.15kg |
Outline Drawing:
All Dimensions in mm
Outline Tolerances ± 0.5(0.02)
Mounting Holes Tolerances ±0.2(0.008)
All Connectors: Strip line
Leader-mw | Test Data |