Products
rf microwave cable assemblies
| Leader-mw | Introduction to Cable Assemblies |
LEADER-MW LHS112-NMNM-XM RF microwave cable with Radio Frequency range of DC3000MHz is a high frequency transmission cable used in electronic equipment and communication systems. This RF connector has low loss, high reliability and good anti-interference. It is widely used in satellite communications, microwave communications, radar, military applications, medical equipment, remote sensing, antennas and other fields.
RF microwave cable assemblies with an RF range of DC3000MHz are characterized by:
1. The RF transmission cable uses high quality copper alloy as the central conductor, which can maintain low loss and stability at high frequencies.
2. Silicone insulation layer has good insulation performance, can effectively resist electromagnetic interference and the influence of the external environment.
3. Rigid PVC casing has high mechanical strength and corrosion resistance, and can maintain reliability in complex environments.
4. The RF connector adopts the standard N, SMA, BNC connection modes, which can be easily connected to various RF devices.
RF microwave cable assemblies with the RF range of DC3000MHz have the advantages of high precision, high bandwidth and low distortion, and have a wide range of applications in the field of high-frequency communications.
| Leader-mw | Specification |
| Frequency Range: | DC~ 3000MHz |
| Impedance: . | 50 OHMS |
| Time delay:（nS/m） | 4.01 |
| VSWR: | ≤1.4 : 1 |
| Dielectric voltage: | 3000 |
| shielding efficiency (dB) | ≥90 |
| Port Connectors: | N-male |
| transmission rate (%) | 83 |
| Temperature phase stability (PPM) | ≤550 |
| Flexural phase stability (°) | ≤3 |
| Flexural amplitude stability (dB) | ≤0.1 |
| Leader-mw | Attenuation |
| LHS112-NMNM-0.5M | 0.3 |
| LHS112-NMNM-1M | 0.4 |
| LHS112-NMNM-1.5M | 0.5 |
| LHS112-NMNM-2.0M | 0.6 |
| LHS112-NMNM-3M | 0.8 |
| LHS1112-NMNM-5M | 1.0 |
| Leader-mw | Mechanical Specifications |
| Cable outer diameter (mm): | 12 |
| Minimum bending radius (mm) | 120 |
| Operating temperature (℃) | -50~+165 |
Outline Drawing:
All Dimensions in mm
Outline Tolerances ± 0.5(0.02)
Mounting Holes Tolerances ±0.2(0.008)
All Connectors: N-Male
