Leader-mw | Introduction to POI Power divider assembly |
1.For the multiple use of outdoor antenna systems and for in-house coverage it is necessary to combine signals from mobile communication base stations of several operators and networks
2.POI is used to combine more than three mobile communication channels with different frequencies, thus allowing several service providers to jointly use more antenna feeder cables or more antennas.
3.POI is used to combine the signals of two or more channels on to many antennas.
Leader-mw | Specification |
Product: 2-way Power Divider
Electrical specifications:
No. | Parameter | Minimum | Typical | Maximum | Units |
1 | Frequency range | 0.5 | - | 6 | GHz |
2 | Isolation | 18 | dB | ||
3 | Insertion Loss | - | 1.0 | dB | |
4 | Input VSWR | - | 1.5 | - | |
Output VSWR | 1.3 | ||||
5 | Phase Unbalance | +/-4 | degree | ||
6 | Amplitude Unbalance | +/-0.3 | dB | ||
7 | Forward Power | 30 | W cw | ||
Reverse Power | 2 | W cw | |||
8 | Operating Temperature Range | -45 | - | +85 | ˚C |
9 | Impedance | - | 50 | - | Ω |
10 | Finish |
Remarks:
1、Not Include Theoretical loss 3db 2.Power rating is for load vswr better than 1.20:1
Leader-mw | Environmental Specifications |
Operational Temperature | -30ºC~+60ºC |
Storage Temperature | -50ºC~+85ºC |
Vibration | 25gRMS (15 degrees 2KHz) endurance, 1 hour per axis |
Humidity | 100% RH at 35ºc, 95%RH at 40ºc |
Shock | 20G for 11msec half sine wave,3 axis both directions |
Leader-mw | Mechanical Specifications |
Housing | Aluminum |
Connector | ternary alloy three-partalloy |
Female Contact: | gold plated beryllium bronze |
Rohs | compliant |
Weight | 0.15kg |
Outline Drawing:
All Dimensions in mm
Outline Tolerances ± 0.5(0.02)
Mounting Holes Tolerances ±0.2(0.008)
All Connectors: SMA-Female
Leader-mw | Test Data |