Leader-mw | Introduction to Broadband 4way power divider |
Leader microwave have the power divider. Unlike splitters and taps, power splitters do not participate in the actual transmission of cable television signals. Instead, its main function is to distribute the power needed to amplify the signal to multiple devices. By distributing power evenly, the splitter ensures each device receives enough power to ensure optimal performance and signal strength. This equipment is typically used in large installations where multiple amplifiers are needed to maintain a strong and consistent cable TV signal throughout the network.
In summary, while splitters, taps, and power splitters may look similar due to their involvement in cable television signal distribution, it is important to recognize their different functions. Splitter focuses on distributing input signals to equal output channels, ensuring consistency for all receivers. Tappers allow portions of the signal to be distributed to specific taps or users, providing flexibility and customization of transmissions. Finally, the power divider ensures that power is distributed evenly between amplifiers, maintaining optimal performance throughout the network. By understanding these differences, you can make an informed decision about which equipment is best for your cable television distribution needs.
Leader-mw | Specification |
LPD-0.3/26.5-4S wideband rf power combiner Power Divider Specifications
Frequency Range: | 300~26500MHz |
Insertion Los: | ≤11.9dB |
Amplitude Balance: | ≤±0.5dB |
Phase Balance: | ≤6deg |
VSWR: | ≤1.40 : 1 |
Isolation: | ≥15dB(0.3GHz-2GHz) |
Impedance: | 50 OHMS |
Port Connectors): | SMA-Female |
Power Handling: | 30 Watt |
Remarks:
1、Not Include Theoretical loss 6db 2.Power rating is for load vswr better than 1.20:1
Leader-mw | Environmental Specifications |
Operational Temperature | -30ºC~+60ºC |
Storage Temperature | -50ºC~+85ºC |
Vibration | 25gRMS (15 degrees 2KHz) endurance, 1 hour per axis |
Humidity | 100% RH at 35ºc, 95%RH at 40ºc |
Shock | 20G for 11msec half sine wave,3 axis both directions |
Leader-mw | Mechanical Specifications |
Housing | Aluminum |
Connector | ternary alloy three-partalloy |
Female Contact: | gold plated beryllium bronze |
Rohs | compliant |
Weight | 0.25kg |
Outline Drawing:
All Dimensions in mm
Outline Tolerances ± 0.5(0.02)
Mounting Holes Tolerances ±0.2(0.008)
All Connectors: SMA-Female
Leader-mw | Test Data |
Leader-mw | Delivery |
Leader-mw | Application |